Maestro 100 Manual de usuario descargar pdf (Pagina 4)

- 2 -

INTRODUCTION

This document describes how to use Maestro 20 / Maestro 100 and a PC with Windows 98 to

make a GPRS Internet Dial-up.

1.1 Setup requirement

The following items are necessary for the setup:

- Maestro 20 / Maestro 100 with PC cable and power supply

- PC with Windows 98 installed, and a free RS-232 port

- A SIM card with GPRS service subscribed

2. CONFIGURATING Maestro 20 / Maestro 100

2.1 Setting up HyperTerminal

Refer to Chapter 2 and 3 of Maestro 20 / Maestro 100 USER GUIDE, set up Maestro 20 /

Maestro 100 and Windows98 HyperTerminal. Make sure the modem is ready to receive

commands.

2.2 Setting serial port speed

On the HyperTerminal, enter command :

AT+IPR=115200; &W<ENTER>

Note: after entering this command the

modem serial port speed will be

permanently set at 115200bps.

Now you can close the HyperTerminal

* If your modem has been configured to

115200bps already before, skip this step.

3. ADDING A MODEM TO WINDOWS 98

3.1 On Windows 98, Choose “Start”,

then choose “Control Panel folder

3.2 Double click the ‘Modem’ icon

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

Maestro 100 Manual de usuario Pagina 4