Maestro M100 2G Manual de usuario Pagina 80
- Pagina / 87
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Confidential, the whole present document is the sole property of Maestro Wireless Solution Ltd.
78
23 QUESTIONS AND ANSWERS
23.1 Installation
Q. If I changed my Maestro 100 2G with the MSP installed, can it be changed back to have TCP/IP feature?
A. It depends. Contact Distributor or Maestro Wireless Solutions.
Q. I have downloaded the dwl file, and entered AT+WOPEN=1, but I still cannot use MSP, why?
A. It could be installation problem. You can issue command AT+WOPEN=0, then AT+WOPEN=4, then repeat the
download procedure. If this still not help you may need to re-flash the main firmware first.
Q. Can I disable the MSP ?
A. Yes, you can enter AT+WOPEN=0 to disable.
Q. I get “Invalid modem” message after downloading dwl file and issuing AT+WOPEN=1. Why?
A. Maybe you have downloaded file into incorrect or damaged modem. Please contact Maestro Wireless Solutions.
Q. I had download incorrect dwl file, and the modem is not responding after issuing AT+WOPEN=1. What should I do?
A. You may need to re-flash the main firmware. Please contact Maestro Wireless Solutions or your distributor.
23.2 AutoTCP/UDP
Q. Can I specify <server> by URL (e.g. xxxx.com) rather than IP address?
A. Yes, but only if your GPRS network have proper DNS service. You cannot specify your own DNS server
Q. If I enabled AutoTCP or AutoUDP, how can I stop it ?
A. you need to enter the command AT+AUTOTCP=0 or AUTOUDP=0 by either 1: within 20 seconds after power up, or
2: during reconnection (serial port back to command mode), or 3: by SMS (see Chapter 11).
23.3 AT command driven TCP/UDP connection
Q. After the TCP/UDP connection is stopped I wan to enter AT+OTCP or AT+OUDP to reconnect but I get message
“+CME ERROR: 3”. Why ?
A. After TCP/UDP socket connection the GPRS connection session will also be disconnected. So please enter
AT+IPCONNECT=1,1 to reconnect GPRS first.
23.4 Remote AT command by SMS
Q. Can I send any AT command by SMS to control other features described in this document?
A. Yes. Please refer to Chapter 11.
23.5 I/O triggered AT command
Q. Can I put any AT command to control other features described in this document?
A. No. MSP AT commands described in this document can be executed by this feature.
- Maestro Smart Pack 1
- User Manual 1
- 1. INTRODUCTION 8
- 2. INSTALLATION 8
- 3.1. GPRS Network Parameters 9
- 3.2.1. AT+CGATT command 10
- 3.2.2. AT+IPCONNECT command 10
- 3.3.1. AT+IPTCP command 11
- 3.3.2. AT+IPUDP command 13
- 1234567890A 14
- BCDEFGH 14
- 3.4.1. AT+IPOPT command 15
- CONNECTION 17
- 4.2.1. AT+AUTOTCP command 19
- 4.2.2. AT+AUTOUDP command 20
- 4.3.1. AT+AUFCM command 21
- 4.4.1. AT+AUOPT command 21
- : <option>,<val> 22
- 5.1.1. AT+DLEMODE command 24
- 5.1.2. AT+OTCP command 25
- 5.1.3. AT+OUDP command 25
- 6. PING SERVICE 27
- 7. DYNAMIC DNS 29
- 7.2.3. AT+IPDDNSUPD command 31
- 8. TCP TERMINAL 33
- 9.2.1. AT+IPSMTP command 35
- 9.2.3. AT+EMSUBJ command 37
- 9.2.4. AT+EMBODY command 37
- 9.2.5. AT+EMSEND command 39
- 10.2.1. AT+SCHOST command 41
- 10.2.2. AT+SCMESS command 42
- 10.2.3. AT+SCSEND command 43
- 11.2.1. AT+SMSAT command 46
- 12.2.1. AT+IOAT command 48
- 13. AI TRIGGERED AT COMMAND 50
- 13.2.1. AT+ADCAT command 51
- 13.2.2. AT+ADCATLMT command 52
- 14 CALL SCREENING 53
- 14.1.3 AT+CSNR command 54
- 14.1.4 AT+CSND command 55
- 15.1.1 AT+TMODE command 56
- 16 AUTOMATIC PIN ENTRY 58
- 17 REMOTE PROGRAM UPDATE 60
- 17.1.2 AT+FTPDOTA command 61
- 17.1.3 AT+ADINSTALL command 62
- TM 1 ST 100 65
- 19.3.1 AT+CSTR command 66
- 19.3.2 AT+CSTRSET command 66
- 20.1 Alarm Service 68
- 20.2 Counter Service 69
- 20.3 Countdown Timer Service 69
- 20.4 Input Port Service 70
- 20.5 SMS Service 71
- 20.6 Email Sending Service 72
- 20.7 Analogue Input Service 74
- SERVICES 77
- 22 KNOWN ISSUES 79
- 23 QUESTIONS AND ANSWERS 80
- 23.6 TCP Terminal 81
Relacionado con productos y manuales para Redes Maestro M100 2G
Redes Maestro 100 Manual de usuario
(11 paginas)
(11 paginas)
Redes Maestro 100 Manual de usuario
(12 paginas)
(12 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.114 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales